ACUTRAC III Plus Ka Hi/Lo Ku Satellite Signal Tracking Meter

TRI-Band Meter (Make aligning the NEW AU9S Antenna EASY!)

Now supports the new AU9 Sl5 and SL3 SWM (Single wire) LNB's from DirecTV

The Acutrac III plus is an affordable, compact satellite signal meter that is capable of reception of both the Ka Band signals and the Ku Band signals. The incorporated data port on the meter allows the Acutrac III to remain flexible with future expansion and developments by giving the user simple access to firmware, or software upgrades.

Coarse align Azimuth & Elevation

1. The ACUTRAC 3+ powers on to send 13v and no (0kHz) tone to measure the RHCP signal from 101 West.
2. Pressing the  Satellite Select button 2 times will send 13V and the 22kHz tone for reading the RHCP signal from the 119 West satellite, only.
3. These 2 selections will provide readings from the farthest points of the 18-degree span between the DTV West and DTV 119 West orbital slots, as per the AT9 Instruction Manual.
4. The Remaining selections cover the alternate polarities of the DTV 110 West with the DTV 119 West using the 18V/22kHz parameters.

Look at up to 4 Satellites at once!

Acutrac III Plus Specfications

• Input Frequencies: (3)
• Ka Hi - 1650-2150 MHz
• Ku - 950-1450MHz
• Ka Lo - 250-750MHz
• Inputs:(2) Field-replaceable ports
  *To LNB
  *To Satellite Receiver (for optional in-line/Loop Through
  
  Measuring Method
  LCD Thermometer-type scales
  -no-specific numerical reference in "tenths" are to be maximized for the highest possible reading of the analog carrier wave.
  
  Power Source
  Internal-(8) AA rechargeable NiMH cells with a 2400mAH capacity rating
  Will also accept standard Alkaline batteries for short term use.
  
  Chargers:
  AC wall transformer included (12VDC 300mA), as well as the DC auto charging cord.
  
  FEATURES
  
  • Supplied with 8 "AA" NiMH rechargeable cells with 1200mAH capacity rating
  • Comes with neoprene rubber insulation case cover and carrying strap
  • AC wall transformer included (12VDC 300mA), as well as the DC auto charging cord
  • Will also accept standard Alkaline batteries for short term use
  • The meter powers the LNB assembly with the internal power supply
  • LCD Thermometer-type scales with non specific numerical reference in "tenths" are to be maximized for the highest possible reading of the analog carrier wave
  • A "must have" signal meter for AT9 or Slim Line (AU9-S) antenna installation
  • Now Identifies DISH Network as well as DirecTV satellites

Download the Acutrac III Plus Manual Here.

No posts found
 

Add new post