PowerTech DG380 HHMotor

• Metal Mounts & Gears Box Inside

• Automatic Zero Backlash (Slack) Adjustment

• For up to 120 cm Steel dish (Max 37lbs).

• Heavy duty construction & precise technology.

• 0.1 degree precision resolution

• +/- 80° Azimuth Rotation angle. 

• DiSEqC 1.2, 1.3,  USALS or "Goto X"

• Stainless Steel U-Bolt mounting screws

• Software Limit Protection

This is one of the best motors in its class.  Brand new design and full of features. 

With a motorized system the dish moves from east to west to track the satellites positioned along the Clarke belt.  Good for any offset dish with a U-bolt. It utilizes a data stream passed up the LNB co-axial lead to the mount. Only one co-axial cable is needed for installation.

Note:  This motor comes with a 50mm (2") shaft to fit dishes with U-Bolts.  If your dish has a Pole mount bracket with 42mm (1 5/8") diameter, then you will need to order the 42mm shaft below.

FEATURE:

• Special design for any receiver with DiSEqC 1.2 & USALS control

• Does NOT require a receiver with built-in Positioner.

• Only one coaxial cable control

• Go to X function

• High efficiency

• Compact structure

• Ultra low noise

• Metal Main Gear

• Adjustable hardware limits

• Easy installation with LED Indicator

• Manual EAST / WEST buttons

• For any dish up to 1.2M (LESS THAN 37 LBS)

• Mounts on Pole Size up to 2.5"

• Shaft Size: 2" (50mm) shaft diameter to fit large dishes with U-Bolts

• Optional Shaft Size:  1 5/8" (42mm) Shaft to Fit smaller dishes with Pole-Bolt brackets.

No posts found
 

Add new post