PowerTech DG-280 DiSEqC Compatible Motor (Hot Item)
|
Description
Send to friend
Reviews
With a motorized system the dish moves from east to west to track the satellites positioned along the Clarke belt. Good for any offset dish with a U-bolt or Pole mounting up to 140 cm Aluminum or 120 cm Steel. Works with all DiSEqC 1.2, 1.3, Goto X compliant receivers. It utilizes a data stream passed up the LNB co-axial lead to the mount. Only one co-axial cable is needed for installation.
Note: This motor comes with a 50mm (2") shaft to fit dishes with U-Bolts. If your dish has a Pole mount bracket with 42mm (1 5/8") diameter, then you will need to order the 42mm shaft option.
| SPECIFICATIONS | |
| Protocol | DiSEqC 1.2 & Goto “X” |
| Compatible Receiver | DiSEqC 1.2, USALS or Interface Box |
| Antenna Size | 120 cm Max (31 lbs) |
| Speed | 1.9° / sec (at 13V) ; 2.5° / sec (at 18V) |
| Azimuth Angle | 80° East ~ 80° West ( 160° ) |
| Elevation Angle | 25~75° |
| Input Voltage | 13 / 18Vdc |
| Output Voltage | 13 / 18Vdc |
| Power Consumption | 50 mA (Standby) / 200mA (Normal) / 350mA (Max.) |
| Satellite Positions | 60 positions |
| Calibration Function | Yes ( Go to 0°) |
| Manual East/West Buttons | Yes (Build-in on the bottom of the Mount) |
| Limit Protection | 1.Fixed type with micro switches |
| 2.Programmable Software Limit | |
| 3.Current Limit | |
| Positioning Sensor | High Resolution Hall Effect Sensor |
| Connector | F-Type |
| Weight ( Mount ) | 3.1 Kg (Net) / 3.5 Kg (Gross) (~ 8 lbs) |
| Dimension ( Mount ) | 345 x 168 x 110 mm3 (Gross) |
No posts found
