PowerTech DG380 HHMotor

View larger image

PART#: DG380
Condition : Brand New
List price: $109.00
Our price: $89.95
You save: $19.05 (17%)
Out of stock : Call or email for availability.

View Manufactuers website
View other products by this manufacturer

Send to friend
  • Metal Mounts & Gears Box Inside

  • Automatic Zero Backlash (Slack) Adjustment

  • For up to 120 cm Steel dish (Max 37lbs).

  • Heavy duty construction & precise technology.

  • 0.1 degree precision resolution

  • +/- 80° Azimuth Rotation angle. 

  • DiSEqC 1.2, 1.3,  USALS or "Goto X"

  • Stainless Steel U-Bolt mounting screws

  • Software Limit Protection

This is one of the best motors in its class.  Brand new design and full of features. 

With a motorized system the dish moves from east to west to track the satellites positioned along the Clarke belt.  Good for any offset dish with a U-bolt. It utilizes a data stream passed up the LNB co-axial lead to the mount. Only one co-axial cable is needed for installation.

Note:  This motor comes with a 50mm (2") shaft to fit dishes with U-Bolts.  If your dish has a Pole mount bracket with 42mm (1 5/8") diameter, then you will need to order the 42mm shaft below.



  • Special design for any receiver with DiSEqC 1.2 & USALS control

  • Does NOT require a receiver with built-in Positioner.

  • Only one coaxial cable control

  • Go to X function

  • High efficiency

  • Compact structure

  • Ultra low noise

  • Metal Main Gear

  • Adjustable hardware limits

  • Easy installation with LED Indicator

  • Manual EAST / WEST buttons

  • For any dish up to 1.2M (LESS THAN 37 LBS)

  • Mounts on Pole Size up to 2.5"

  • Shaft Size: 2" (50mm) shaft diameter to fit large dishes with U-Bolts

  • Optional Shaft Size:  1 5/8" (42mm) Shaft to Fit smaller dishes with Pole-Bolt brackets.

Protocol DiSEqC 1.2 & Goto “X”
Compatible ReceiverDiSEqC 1.2, USALS or Interface Box
Antenna Size120 cm Max (37 lbs)
Speed 1.9° / sec (at 13V) ; 2.5° / sec (at 18V)
Azimuth Angle 80° East ~ 80° West ( 160° )
Elevation Angle 25~75°
Input Voltage 13 / 18Vdc
Output Voltage 13 / 18Vdc
Power Consumption50 mA (Standby)
 200mA (Normal)
 350mA (Max.)
Satellite Positions 60 positions
Calibration Function Yes ( Go to 0°)
Manual East/West Buttons Yes (Build-in on the bottom of the Mount)
Limit Protection 1.Fixed type with micro switches
 2.Programmable Software Limit
 3.Current Limit
Positioning Sensor High Resolution Hall Effect Sensor
Weight ( Mount ) 3.1 Kg (Net) / 3.5 Kg (Gross) (~ 8 lbs)
Dimension ( Mount ) 345 x 168 x 110 mm3 (Gross)


To ensure that a person, not an automated program, is filling this form, please enter the characters you see in this picture. All letters will be shown in their capitalized form.