Magic Bracket III adjustable 3 LNB bracket for any dish


View larger image

PART#: MBIII
Condition : Brand New
List price: $19.95
Our price: $12.95
You save: $7.00 (35%)
Florida
Out of stock : Call or email for availability.
 
Digiwave

View Manufactuers website
View other products by this manufacturer

http://www.cyberestore.com/index.php?target=products&product_id=232
Description
Send to friend
This Magic Bracket can connect 3 different LNB's for 3 different satellites.

Compatible with 30mm or 40mm LNBF's

You can get 4 axes point’s adjustments: forwards/backwards, up/down, left/right, side to side.

This Magic Bracket can extend to handle up unlimited LNBF's.

How To Using Magic Mount

How To Using Muti LNB Bracket

The Magic Bracket can connect up to 3 LNBF's or more in order receive 3 or more different satellite signals in one dish.

All 3 LNBF's can adjust up, down, forward, backward, left and right.
It should let your 18" dish as Dish 500.
It should let your 24"X 27" dish as SUPER DISH.
It should let your 33" or 36" dish as T55, T90.
It should let DSS, FSS and FTA satellite locate in one dish.
More and more.....

This Bracket can hold all kind of LNBF's.
Compatible with 30mm or 40mm LNBF's
you can get 4 axes point’s adjustments: forwards/backwards, up/down, left/right, side to side.

How to setup 101,110, 119 DTV in one dish Using Digiwave Mount
Here is what you need.....

A: 1-18”, 24”, 33” or 36" inch offset dish

B: 3-LNBs.

C: 1- Digiwave Magic Mount III

D: Measuring device. I used a tape measure. A ruler that can measure out 1/2 inch.

Here is what you do......

Connect all 3 Lnbf's to Super Mount. Now move it so it is about 1/2 inch higher than the first. Move it so it is about 1/2 inch higher than the second. The 1/2 inch does not have to be exact, but fairly close. The Magic Mount has Ruler marks. Hopefully, between reading and looking at the pictures, you'll make it work. First time setup took quite some time to get it figured out.

The LNB on your right will be looking at Sat. 101, the middle one 110, and the left one
Will be 119. Mount the LNBF back to a dish. Mount the middle one to dish just like normal. As for tuning, hooked up Directv to the 101 LNB and tuned it till had signal. You could also hook up DISH to the 119 LNB and tune it in. Once you have one of them working, the other two LNBF WILL be seeing signal at its respective Sat. You will probably have to compromise on signal strength depending on where you are and what you are watching.

This is working for Dishnetwork 110, 119, 121 too. But, between 119 and 121 will more close and almost on the same level.

This is working for BEV 82, 91, 97 too.

We can add more Super mount fingers in order to receive more satellites on one dish. For example, we can put Dishnet 110,119,121, Bev 91 together. Or combine with FTA LNB and receiver DSS satellite and FTA satellite together.

How to setup 110, 119, 121 in one dish (super Dish) by using Digiwave Mount
Here is what you need.....
A: 24” or 33” inch offset dish (or larger)

B: 2 DSS DN circular Lnbf -LNBF. 1- ku-linear Standard LNBF.

C: 1-Magic Mount III

D: Measuring device. I used a tape measure. A ruler that can measure out 1/2 inch.

Here is what you do......

Moun the ku-linear Lnbf to the dish arm and mounted a 1/2" emt conduit pipe 6" long. I located and locked onto sat 121 with the highest quality possible and mount the circular DN Lnbf for 119 to the right of 121 (looking at it from behind the dish) and then mount the circular DN 110 Lnbf to the right of 119.

The brackets that hold the Lnbf are from 1/2" to 2" emt pipe clamps/brackets. With this kind of setup you can get 4 axes point’s adjustments: forwards/backwards, up/down, left/right, side to side. The quality for 110 will get from 90% to 100% , For 119 will get 80% to 98% and for 121 will get 70% to 95% depending on the transponder, But you would need to play with 119 to get the best quality you can for the both 119 and 121. With this kind of setup should get 82, 91, and 97 on one dish too.

How to setup 82, 91, and 97 in one dish (super Dish) by using Magic Mount
Here is what you need.....
A: 24” or 33” inch offset dish (or larger)

B: 2 DSS DN circular Lnbf -LNBF. 1- ku-linear Standard LNBF.

C: 1-Magic Mount III

D: Measuring device. I used a tape measure. A ruler that can measure out 1/2 inch.

setup same as ----How to setup 110, 119, 121 in one dish (super Dish)


  
*
  
  
*

To ensure that a person, not an automated program, is filling this form, please enter the characters you see in this picture. All letters will be shown in their capitalized form.

  Redraw

Characters: 

Loading...