PowerTech DG-280B DiSEqC Compatible Motor with 42mm shaft

View larger image

PART#: DG-280B
Condition : Brand New
List price: $99.95
Our price: $79.95
You save: $20.00 (20%)

View Manufactuers website
View other products by this manufacturer

Send to friend

With a motorized system the dish moves from east to west to track the satellites positioned along the Clarke belt. Good for any offset dish with a U-bolt or Pole mounting up to 100 cm Aluminum or 100 cm Steel. Works with all DiSEqC 1.2, 1.3, Goto X compliant receivers. It utilizes a data stream passed up the LNB co-axial lead to the mount. Only one co-axial cable is needed for installation.

This is one of the best motors in its class.  Brand new design and full of features. 

  • Metal Mounts & Gears Inside

  • Manual Backlash (Slack) Adjustment

  • For up to 100 cm Steel (Max 25lbs).

  • Heavy duty construction & precise technology.

  • +/- 80° Azimuth Rotation angle.

  • 42MM (1 5/8") Shaft

  • DiSEqC 1.2, 1.3,  USALS or "Goto X"

  • Software Limit Protection

Note:  This motor comes with a 42mm (1 5/8") shaft to fit dishes with Pole mount bracket.  If your dish has a U-Bolt mount bracket, then you will need to order the DG280 model.

  • Special design for any receiver with DiSEqC 1.2 & USALS control

  • Does NOT require a receiver with built-in Positioner.

  • Only one coaxial cable control

  • Go to X function

  • High efficiency

  • Compact structure

  • Ultra low noise

  • Metal Main Gear

  • Adjustable hardware limits

  • Easy installation with LED Indicator

  • Manual EAST / WEST button

  • For any dish up to 1.2M (LESS THAN 31 LBS)

  • Mounts on Pole Size up to 2.5"

  • Shaft Size:  1 5/8" (42mm) Shaft to Fit smaller dishes with Pole-Bolt brackets.

  • Optional Shaft Size: 2" (50mm) shaft diameter to fit large dishes with U-Bolts

Protocol  DiSEqC 1.2 & Goto “X”
Compatible Receiver DiSEqC 1.2, USALS or Interface Box
Antenna Size 120 cm Max (31 lbs)
Speed  1.9° / sec (at 13V) ; 2.5° / sec (at 18V)
Azimuth Angle  80° East ~ 80° West ( 160° )
Elevation Angle  25~75°
Input Voltage  13 / 18Vdc
Output Voltage  13 / 18Vdc
Power Consumption 50 mA (Standby)
  200mA (Normal)
  350mA (Max.)
Satellite Positions  60 positions
Calibration Function  Yes ( Go to 0°)
Manual East/West Buttons  Yes (Build-in on the bottom of the Mount)
Limit Protection  1.Fixed type with micro switches
  2.Programmable Software Limit
  3.Current Limit
Positioning Sensor  High Resolution Hall Effect Sensor
Connector F-Type
Weight ( Mount )  3.1 Kg (Net) / 3.5 Kg (Gross) (~ 8 lbs)
Dimension ( Mount )  345 x 168 x 110 mm3 (Gross)

To ensure that a person, not an automated program, is filling this form, please enter the characters you see in this picture. All letters will be shown in their capitalized form.