HDHomeRun™ TECH Networked Digital TV Tuner (TECH)

Cross Platform Support • Static Channel Mapping Broadcast Signal Diagnostics and Monitoring

Market Deployments:
• Educational Institutions
• Multi-Dwelling Units (MDU)
• Corporate Environments
• Hospitality Locations
• Television Broadcast Outlets
• Head End Diagnostics
• Remote Site Monitoring
• Low Cost Field Technician Solution

TECH-US

• 2 tuners:
• ATSC (8VSB)
• Digital Cable (QAM256/64 Annex B)
• 47MHz to 862MHz tuning range
• 6MHz channel bandwidth
• Up to +40dBmV operation
• 100baseTX Ethernet

Features

• TS Reader stream analysis (optional/Not Included)
• Calibrated dBmV signal level display
• dB signal quality (MER) display
• Constellation plot display (HDHR-TECH-US only)
• Multicast support
• Configurable TTL
• Static channel/target/ip configuration
• Scriptable from Windows, OSX, Linux, *BSD, Solaris
• 2 year warranty

Tuner Interface:
75 Ohm F Connector (2 connectors)
Network Interface: IEEE802.3u 100Base-TX Ethernet (RJ-45)
Dimensions (WxDxH): 180mm x 117mm x 35mm
Power: 5V DC @1Amp

Operating Temperature: 0°C to 45°C (32°F to 105°F)
Operating Humidity: 20% to 80% (Non-Condensing)

Modulation: 8VSB / QAM64 / QAM256 (Annex B)
Frequency Range: 52 to 864 MHz
Input Level: -12 to +40 dBmV
Bandwidth: 19.392Mbps (8VSB) / 26.970Mbps (QAM64) / 38.810Mbps (QAM256)
Hardware PID Filter: Program Number / Arbitrary PID Ranges
Signal Diagnostics: dBmV / MER measurements Constellation Plot

Address: IPv4 (RFC791) AutoIP / DHCP / Static
Control:TCP
Data:UDP / RTP encapsulated MPEG2-TS
Time To Live (TTL): User configurable

• Multicast support
• Non-volatile configuration storage
• Upgradeable firmware Multi-unit expandable

HDHomerun Software & Instructions can be found here.

HDHomerun TECH usage guide is here.

No posts found
 

Add new post